Integration of Health and Position Tracking System for Extreme Environments in Mining and Mountain Climbing

  • P. Velavan Department of Computer Science and Engineering, Dhaanish Ahmed College of Engineering, Padappai, Chennai, Tamil Nadu, India
  • I. Syed Hakkim Department of Artificial Intelligence and Data Science, Dhaanish Ahmed College of Engineering, Padappai, Chennai, Tamil Nadu, India
  • A. Prasanth Department of Artificial Intelligence and Data Science, Dhaanish Ahmed College of Engineering, Padappai, Chennai, Tamil Nadu, India
  • A. Ranjith Kumar Department of Artificial Intelligence and Data Science, Dhaanish Ahmed College of Engineering, Padappai, Chennai, Tamil Nadu, India
  • M. Mohamed Thariq Department of Computer Science and Engineering, Dhaanish Ahmed College of Engineering, Padappai, Chennai, Tamil Nadu, India
Keywords: Global Positioning System (GPS), Climbers and Miners, Sensor Networks, Altitude Sickness, Hill Climbing, Long Range (LoRa)

Abstract

These days, it's more necessary than ever to check on the health and safety of coal miners and mountain climbers.  There are numerous steps that need to be taken to ensure the safety of miners and climbers.  They need pulse rate monitors and the necessary communication gear to communicate with the control centres, allowing them to monitor the health of the climbers and miners.  It turns out that mountain climbers and coal miners can't use it when the weather is particularly poor, and at some heights, it's even less helpful because of communication problems.  The work suggests a health and position tracking system that utilises GPS to determine the individual's current location and also monitors their heartbeat and temperature. This technology addresses the challenges faced by mountain climbers and coal miners, enabling them to receive immediate support.  People who engage in mountaineering and mining activities often participate in various pursuits, including hiking, climbing hills, and mining, among others.  But it can be dangerous.  People often become ill at high altitudes, go missing, or fall by accident.  There are many reports of deaths and serious injuries caused by climbing mountains and mining. We need to monitor accidents that occur while climbing mountains and engaging in mining activities, and develop a strategy to rescue people.  People have explored this topic and believe that Wireless Sensor Networks and Telehealth are effective approaches to address it.  To deliver data over very long distances where there is no network coverage, low-power devices were needed.  Because of this, wireless technologies like Long Range (LoRa), which is a network that can carry data over long distances without requiring a significant amount of power, can be utilised.  A safety device that utilises LoRa technology to monitor a person's location is installed.  The Internet of Things (IoT) and LoRa gateway work together to make a cloud server.  This method gives you a way to keep an eye on things, track them, and obtain help promptly.

References

S. A. Korkmaz and M. Poyraz, “Path planning for rescue vehicles via segmented satellite disaster images and GPS road map,” in Proc. 9th Int’l. Congress Image and Signal Processing, Bio Medical Engineering and Informatics (CISP-BMEI), Datong, China, pp. 145–150, 2016.

M. Poulton and G. Roussos, “Towards smarter metropolitan emergency response,” in Proc. 24th Annu. Int’l. Symp. Personal, Indoor, and Mobile Radio Communications (PIMRC), London, United Kingdom, pp. 2576–2580, 2013.

D. Sumathi and P. Poongodi, "Scheduling Based on Hybrid Particle Swarm Optimization with Cuckoo Search Algorithm in Cloud Environment," IIOAB Journal, vol. 7, no. 9, pp. 358-366, 2016.

D. Sumathi and P. Poongodi, "Secure medical information processing in cloud: Trust with swarm based scheduling," Journal of Medical Imaging and Health Informatics, vol. 6, no. 7, pp. 1636-1640, 2016.

D. Sumathi and P. Poongodi, "An improved scheduling strategy in cloud using trust based mechanism," Int. J. Comput. Electr. Autom. Control Inf. Eng, vol. 9, no. 2, pp. 637-641, 2015.

D. Sumathi, B. Melinamath, and R. Goyal, "Iov Traffic Prediction Utilizing Bidirectional Memory and Spatiotemporal Constraints with Local Search and NonLinear Analysis," Journal of Computational Analysis & Applications, vol. 33, no. 2, 2024.

D. Sumathi, A. Singh, A. Sinha, D. Aditya, and M. R. KF, "The Deepfake Dilemma: Enhancing Deepfake Detection with Vision Transformers," in 2025 International Conference on Intelligent and Innovative Technologies in Computing, Electrical and Electronics, Jan. 2025, pp. 1-7.

V. B. Gowda, M. T. Gopalakrishna, J. Megha, and S. Mohankumar, “Foreground segmentation network using transposed convolutional neural networks and up sampling for multiscale feature encoding,” Neural Netw., vol. 170, pp. 167–175, 2024.

V. B. Gowda, G. M. Thimmaiah, M. Jaishankar, and C. Y. Lokkondra, “Background-foreground segmentation using Multi-scale Attention Net (MA-Net): A deep learning approach,” Rev. Intell. Artif., vol. 37, no. 3, pp. 557–565, 2023.

V. B. Gowda, M. G. Krishna, and J. Megha, “Dynamic Background Modeling and Foreground Detection using Orthogonal Projection onto the Subspace of Moving Objects,” in Proc. IC3, 2023, pp. 171–176.

V. B. Gowda, M. T. Gopalakrishna, J. Megha, and S. Mohankumar, “Background initialization in video data using singular value decomposition and robust principal component analysis,” Int. J. Comput. Appl., vol. 45, no. 9, pp. 600–609, 2023.

A. K. Joshi and S. B. Kulkarni, “Flow analysis of vehicles on a lane using deep learning techniques,” J. Adv. Inf. Technol., vol. 14, no. 6, pp. 1354–1364, 2023.

A. K. Joshi, V. Shirol, S. Jogar, P. Naik, and A. Yaligar, “Credit card fraud detection using machine learning techniques,” Int. J. Sci. Res. Comput. Sci. Eng. Inf. Technol., vol. 6, no. 3, pp. 436–442, 2020.

A. K. Joshi and S. B. Kulkarni, “Multi-modal information fusion for localization of emergency vehicles,” Int. J. Image Graph., vol. 24, no. 1, Art. no. 2550050, 2024.

A. K. Joshi and S. B. Kulkarni, “Multimodal deep learning information fusion for fine-grained traffic state estimation and intelligent traffic control,” Int. J. Intell. Syst. Appl. Eng., vol. 11, no. 3, pp. 1020–1029, 2023.

V. S. A. Anala, A. R. Pothu, and S. Chintapalli, “Enhancing Preventive Healthcare with Wearable Health Technology for Early Intervention,” FMDB Transactions on Sustainable Health Science Letters., vol.2, no.4, pp. 211–220, 2024.

V. S. A. Anala and S. Chintapalli, “Scalable Data Partitioning Strategies for Efficient Query Optimization in Cloud Data Warehouses,” FMDB Transactions on Sustainable Computer Letters., vol. 2, no. 4, pp. 195–206, 2024.

Md H. Rahman, T. Islam, Md E. Hossen, Md E. Chowdhury, R. Hayat, Md S. S. Shovon, M. Alamgir, S. Akter, R. Chowdhury, and A. R. Sunny, "Machine Learning in Healthcare: From Diagnostics to Personalized Medicine and Predictive Analytics," J. Angiother., vol. 8, no. 12, pp. 1–8, 2024.

R. Chowdhury, Md A. H. Fahad, S. M. S. Alam, M. I. Tusher, Md N. U. Rana, E. Ahmed, S. S. Akhi, and Md R. H. Mahin, "Database Management in the Era of Big Data: Trends, Challenges, and Breakthroughs," Pathfinder Res., vol. 1, no. 1, p. 15, 2020.

Md R. H. Mahin, E. Ahmed, S. S. Akhi, Md A. H. Fahad, M. I. Tusher, R. Chowdhury, and Md N. U. Rana, "Advancements and Challenges in Software Engineering and Project Management: A 2021 Perspective," Pathfinder Res., vol. 2, no. 1, p. 15, 2021.

Md A. H. Fahad and R. Chowdhury, "Evolution and Future Trends in Web Development: A Comprehensive Review," Pathfinder Res., vol. 3, no. 1, p. 13, 2022.

S. N. Akhter, R. Kumari, and A. Kumar, “Fertility booster effect of Asparagus recemosus against arsenic induced reproductive toxicity in Charles Foster rats,” J. Adv. Zool., vol. 45, no. 5, 2024.

Z. Hashmi, R. Kumari, and A. Kumar, “Antidote effect of Bacopa Koneru against arsenic induced toxicity in rats,” J. Adv. Zool., vol. 45, no. 5, 2024.

Z. Hashmi, R. Kumari, and A. Kumar, “Phytoremedial effect of Ocimum sanctum against arsenic induced toxicity in Charles Foster rats,” J. Adv. Zool., vol. 45, no. 5, 2024. [Online]. Available: http://jazindia.com. ISSN: 0253-7214.

B. Kumari, P. Das, and R. Kumari, “Accelerated processing of solitary and clustered abasic site DNA damage lesion by APE1 in the presence of aqueous extract of Ganoderma lucidum,” J. Biosci., vol. 41, pp. 265–275, 2016.

R. Kumari, R. K. Singh, N. Kumar, and R. Kumari, “Preparation of superfine Bael leaf nanopowder, physical properties measurements and its antimicrobial activities,” Egypt. Chem. Bull., vol. 12, no. 4, pp. 284–297, 2023.

M. K. Sinha, R. Kumari, and A. Kumar, “Ameliorative effect of Ganoderma lucidum on sodium arsenite induced toxicity in Charles Foster rats,” J. Adv. Zool., vol. 45, no. 5, 2024.

V. Rajavel, "Integrating power-saving techniques into design for testability of semiconductors for power-efficient testing," The American Journal of Engineering and Technology, vol. 7, no. 3, pp. 243–251, 2025.

V. Rajavel, "Novel machine learning approach for defect detection in DFT processes," ASRJETS-Journal, vol. 101, no. 1, pp. 325–334, Apr. 2025.

V. Rajavel, "Optimizing semiconductor testing: Leveraging stuck-at fault models for efficient fault coverage," Int. J. Latest Eng. Manag. Res. (IJLEMR), vol. 10, no. 2, pp. 69–76, Feb. 2025.

Md S. Miah and Md S. Islam, "Big Data Analytics Architectural Data Cut off Tactics for Cyber Security and Its Implication in Digital forensic," in Proc. 2022 Int. Conf. Futuristic Technol. (INCOFT), Belgaum, India, 2022, pp. 1–6.

M. A. Obaida, Md S. Miah, and Md. A. Horaira, “Random Early Discard (RED-AQM) Performance Analysis in Terms of TCP Variants and Network Parameters: Instability in High-Bandwidth-Delay Network,” Int. J. Comput. Appl., vol. 27, no. 8, pp. 40–44, Aug. 2011.

A. Srivastava, “Use of Python in Data Science, Data Integration and Data Engineer,” Int. J. Sci. Res. Eng. Manag., vol. 8, no. 7, 2024.

A. Srivastava, “AI in Healthcare and its Future,” J. Artif. Intell. Cloud Comput., vol. 1, no. 1, pp. 1–2, Mar. 2022.

A. Srivastava, “Cloud Replacing Traditional Database,” Int. J. Multidiscip. Res., vol. 7, no. 2, pp. 1–2, Mar.–Apr. 2025.

A. Srivastava, “Data Transformation Normalization to Denormalization in Cloud,” Int. J. Core Eng. Manag., vol. 6, no. 7, pp. 249–252, 2020.

A. Srivastava, “Impact of AI/ML on Job Market and Skills Set and Health Industry,” ESP J. Eng. Technol. Adv., vol. 4, no. 3, pp. 122–126, 2024.

A. Srivastava, “Integrated Snowflake with AWS and AWS ETL Migration,” Int. J. Multidiscip. Res., vol. 7, no. 1, pp. 1–6, Jan.–Feb. 2025.

G. Kashyap, "Neural Architecture Search (NAS): Exploring the Trade-Offs In Automated Model Design and Its Impact on Deep Learning Performance," Int. J. Innov. Res. Eng. Multidiscip. Phys. Sci., vol. 13, no. 2, pp. 1–12, Mar.–Apr. 2025.

G. Kashyap, "Large Language Models and Their Ethical Implications: The role of models like GPT and BERT in shaping future AI applications and their risks," Int. J. Innov. Res. Creat. Technol., vol. 6, no. 6, pp. 1–5, Dec. 2020.

G. Kashyap, "AI for Epidemiology: Using AI to Predict and Track the Spread of Diseases like COVID-19," Int. J. Innov. Res. Multidiscip. Field, vol. 3, no. 6, pp. 1–10, Nov. 2021.

G. Kashyap, "AI for Threat Detection and Mitigation: Using AI to Identify and Respond to Cybersecurity Threats in Real-Time," Int. J. Sci. Res. Eng. Manag. Sci., vol. 6, no. 6, pp. 1–5, Nov. 2024.

G. Kashyap, "AI for Information Retrieval: Advancements in Search Engines and Chatbots through Deep Learning-Based Query Understanding," Int. J. Innov. Res. Creat. Technol., vol. 7, no. 1, pp. 1–7, Jan. 2021.

G. Kashyap, "Multilingual NLP: Techniques for Creating Models that Understand and Generate Multiple Languages with Minimal Resources," Int. J. Sci. Res. Eng. Manag. Sci., vol. 6, no. 12, pp. 1–5, Dec. 2024.

G. Kashyap, "Adversarial Attacks and Defenses: Investigating How AI Systems Can Be Manipulated Through Adversarial Inputs and Methods to Defend Against Them," Int. J. Innov. Res. Creat. Technol., vol. 7, no. 1, pp. 1–6, Feb. 2021.

G. Kashyap, "Reinforcement Learning in Dynamic Environments: Developing RL Algorithms That Can Adapt to Continuously Changing Environments," Int. J. Innov. Res. Creat. Technol., vol. 8, no. 4, pp. 1–10, Jul. 2022.

G. Kashyap, "Impact of AI on blockchain scalability: Solutions and trade-offs," Int. J. Core Eng. Manag., vol. 7, no. 1, pp. 197–202, 2022.

G. Kashyap, "Explainable AI (XAI): Methods and techniques to make deep learning models more interpretable and their real-world implications," Int. J. Innov. Res. Eng. Multidisciplinary Phys. Sci., vol. 13, no. 1, pp. 1–8, Jan. 2025.

G. Kashyap, "Knowledge transferring techniques: AI in learning transfer," Science Data & Learning Machine Intelligence Artificial Journal, vol. 4, no. 1, pp. 1898–1902, Dec. 2023.

G. Kashyap, "AI in blockchain-enabled healthcare systems: Transforming healthcare delivery and data security," ESP Journal of Engineering & Technology Advancements, vol. 3, no. 8, pp. 109, 2023.

G. Kashyap, "Knowledge graphs and NLP: Integrating structured knowledge into NLP systems for better reasoning and contextual understanding," Int. J. Innov. Res. Eng. Multidiscip. Phys. Sci., vol. 13, no. 2, pp. 1–7, Mar.–Apr. 2025.

A. Dixit, P. Dhanalakshmi, P. T. Rameshchandra, K. S. Chachlani, B. J. Kukreja, Ananya, et al., “Effectiveness of online vs. in-person periodontal health workshops for public awareness,” J. Pharm. Bioall. Sci., vol. 16, pp. S777–S779, 2024.

A. Katariya and B. J. Kukreja, “A modification of fenestration technique (MOFT) to increase vestibular depth: A case series,” Indian J. Dent. Res.

A. Katariya, B. J. Kukreja, and S. C. Dinda, “A microbiological study to evaluate the effect of different concentrations of coenzyme Q10 in inhibiting key pathogens of periodontitis,” Eur. Chem. Bull., vol. 12, no. 10, pp. 5826–5843, 2023.

A. Singh, I. Menon, V. Aggarwal, B. J. Kukreja, P. Kukreja, and R. P. Singh, “Evaluation of quality of dental care and patient’s perception for treatment received in dental institution in Moradabad, Uttar Pradesh,” Int. J. Oral Care Res., vol. 3, no. 3, pp. 10–40, 2016.

D. Singhal, R. Mohan, K. Krishna, B. J. Kukreja, and A. Singh, “Genetics: Application in periodontal disease,” TMU J. Dent., vol. 4, no. 4, pp. 143–148, 2017.

G. Yadavalli, P. Singhal, N. Gupta, B. J. Kukreja, B. Gupta, P. Kukreja, R. S. Makkad, and D. Mehta, “Evaluation of immunohistochemical markers in oral squamous cell carcinoma,” Bioinformation, vol. 19, no. 13, pp. 1399–1404, 2023.

K. Arora, V. Dodwad, B. J. Kukreja, and S. Nagpal, “A comparative evaluation of the efficacy of glycine air polishing following scaling and root planing & scaling and root planing alone in the treatment of chronic periodontitis: A clinical study,” J. Dent. Specialities, vol. 1, no. 2, pp. 47–54, 2013.

K. R. Anand, P. Kukreja, S. Kumar, B. J. Kukreja, and M. Sharma, “Nonsurgical treatment of ameloblastoma—Where are we?” Clin. Dent., vol. 7, pp. 26–28, 2014.

M. Gera, S. Chaudhary, A. S. Dhillon, V. Dodwad, S. Vaish, and B. J. Kukreja, “Pink in, black out—a clinical study,” J. Dent. Specialities., vol. 4, no. 1, pp. 31–35, 2016.

M. Kumar, M. Goyal, B. Jha, S. Tomar, and A. Kushwah, “An innovative procedure for lip lengthening in a patient with a short upper lip and high angle skeletal class II pattern: A case report,” J. Indian Orthod. Soc., vol. 30, pp. 1–8, 2021.

M. Ray, B. J. Kukreja, A. Katariya, et al., “Evaluation of buccal pad fat combined with demineralized freeze-dried bone allograft in treatment of Grade II furcation defects: A clinical radiographic study,” World J. Dent., vol. 15, no. 6, pp. 459–467, 2024.

M. S. Dua, A. Dua, B. J. Kukreja, V. Dodwad, A. S. Sethi, and P. Kukreja, “Periodontal disease and preterm low birth weight,” Int. J. Oral Care Res., vol. 2, no. 6, pp. 49–55, 2014.

P. Kukreja, A. F. Qahtani, M. F. Qahtani, M. F. Qahtani, and B. J. Kukreja, “Use of stem cells in tissue engineering and reconstruction of the maxillofacial region,” Int. J. Res. Med. Sci., vol. 8, no. 7, pp. 2740–2745, 2020.

P. Mishra, S. Jha, D. Pandey, A. Thakur, and B. J. Kukreja, “Clinical and laboratory predictors of chronic immune thrombocytopenia in children: A study of 25 cases and review of literature,” Int. J. Biomed. Adv. Res., vol. 10, no. 2, p. e5104, 2019.

P. Tyagi, V. Dodwad, B. J. Kukreja, and P. Kukreja, “A comparison of the efficacy of scaling and root planing with application of pomegranate chip, pomegranate gel and scaling and root planing in sufferers with adult periodontitis - a prospective study,” J. Indian Soc. Periodontol., vol. 25, pp. 41–46, 2021.

P. Verma, U. Gupta, V. Dodwad, B. J. Kukreja, and K. Arora, “Evaluation of the clinical efficacy of a new desensitizing toothpaste containing nano-crystalline hydroxyapatite in dentine hypersensitivity patients: A double-blind randomized controlled clinical trial,” J. Dent. Specialities, vol. 1, no. 2, pp. 42–46, 2013.

R. Saleem, B. J. Kukreja, M. Goyal, and M. Kumar, “Treating short upper lip with ‘Unified lip repositioning’ technique: Two case reports,” J. Indian Soc. Periodontol., vol. 26, pp. 89–93, 2022.

R. Sood, A. Gulri, U. Gupta, B. J. Kukreja, and V. Dodwad, “Efficacy of biodegradable xanthan-based chlorhexidine gel (Chlosite®) and 0.2% chlorhexidine irrigation following scaling and root planing for the treatment of chronic periodontitis,” Int. J. Oral Care Res., vol. 2, no. 6, pp. 1–7, 2014.

S. Bansal, P. Kukreja, S. Kumar, M. Sharma, K. R. Anand, and B. J. Kukreja, “Anaesthetic efficacy of anterior middle superior alveolar nerve block for extraction of anterior maxillary anterior teeth,” J. Dent. Specialities, vol. 2, no. 2, pp. 1–4, 2014.

S. Gupta, K. K. G. Rangappa, S. Rani, R. Ganesh, P. Kukreja, and B. J. Kukreja, “Periodontal and dentition status among psychiatric patients in Indore: A descriptive cross-sectional study,” J. Contemp. Dent. Pract., vol. 23, no. 12, pp. 1260–1266, 2022.

S. S. Kumararama, M. Patil, B. J. Kukreja, M. Salkar, S. Verma, N. Pattnaik, et al., “Efficacy of antibiotics versus probiotics as adjuncts to mechanical debridement for the treatment of peri-implant mucositis,” J. Pharm. Bioall. Sci., vol. 16, pp. S3389–S3391, 2024.

T. Bera, B. J. Kukreja, C. Sharma, V. V. Gupta, P. Patel, P. Singhal, et al., “Relative contribution of trabecular and cortical bone to primary implant stability: An in vitro model study,” J. Pharm. Bioall. Sci., vol. 16, pp. S3427–S3429, 2024.

T. Mishra, B. J. Kukreja, R. Patel, M. Ghadage, P. Dalave, S. Kumari, et al., “In vitro evaluation of titanium exfoliation during simulated surgical insertion of dental implants,” J. Pharm. Bioall. Sci., vol. 16, pp. S3383–S3385, 2024.

Y. M. Talib, W. N. Albalushi, M. D. Fouad, A. M. Salloum, B. J. Kukreja, H. Abdelmagyd, “Bilateral inverted and impacted mandibular third molars: A rare case report,” Cureus, pp. 2–9, 2023.

S. Dahiya, U. Gupta, V. Dodwad, B. J. Kukreja, and P. Dasgupta, “The enzyme activity of alkaline phosphatase in gingival crevicular fluid of smokers and non-smokers with chronic periodontitis before and after phase I therapy,” J. Pharm. Biomed. Sci., vol. 32, no. 32, pp. 1348–1353, Jul. 2013.

G. Kashyap, "Self-supervised learning: How self-supervised learning approaches can reduce dependence on labeled data," Int. J. Innov. Res. Creat. Technol., vol. 10, no. 4, pp. 1–10, Jul. 2024.

G. Kashyap, "Unsupervised learning for high-dimensional data: Advancements in unsupervised learning techniques like clustering, anomaly detection, and dimensionality reduction," Int. J. Leading Res. Publ., vol. 5, no. 12, pp. 1–10, Dec. 2024.

G. Kashyap, "Meta-learning: Learning to learn: Investigating how meta-learning algorithms can improve learning efficiency across tasks," Int. J. Sci. Res. Eng. Manag., vol. 8, no. 12, pp. 1–7, Dec. 2024.

G. Kashyap, "Infrastructure automation using Ansible and YAML for IT environment build in the health insurance industry," Int. J. Innov. Res. Creat. Technol., vol. 10, no. 6, pp. 1–10, Dec. 2024.

G. Kashyap, "Quantum machine learning: Exploring the intersection of quantum computing and AI," Int. J. Innov. Res. Eng. Multidiscip. Phys. Sci., vol. 13, no. 2, pp. 1–8, Mar.–Apr. 2025.

G. Kashyap, "AI for robustness and fairness: Addressing bias, fairness, and robustness in machine learning algorithms," Sci. Data Learn. Mach. Intell. Artif. J., vol. 1, no. 3, pp. 1–15, Jan. 2025.

A. Dixit, N. H. Parekh, R. Anand, N. Kamal, A. Kumar, and B. K. Badiyani, “An online survey to examine the dental students' awareness, knowledge, prevention, and early detection of oral cancer,” J. Pharm. Bioall. Sci., vol. 15, pp. S984–S986, 2023.

S. S. Kumararama, S. Patel, N. H. Parekh, P. Bhate, B. J. Kukreja, T. Hazra, et al., “Investigating how frequently dental professionals conduct oral cancer screenings during routine dental checkups and the methods they use,” J. Pharm. Bioall. Sci., vol. 16, p. S7835, 2024.

Shaiva Thakar, Niraj Kinariwala, Dhrusha Pandya, Nirav H Parekh, Niravkumar K Patel, Aastha Patel “Awareness and constraints towards the implementation of green dentistry amongst dental students and private practitioners of West India,” J. Pharm. Bioall. Sci., vol. 15, pp. S1287–S1290, 2023.

M. Ranjan, Tushar, N. H. Parekh, A. Dixit, P. Rakshit, B. P. Agre, et al., “Investigating how cultural and socioeconomic factors influence oral cancer prevention behaviors, screening uptake, and treatment outcomes,” J. Pharm. Bioall. Sci., vol. 16, pp. S786–S788, 2024.

A. Dixit, N. H. Parekh, R. Anand, N. Kamal, B. K. Badiyani, A. Kumar, et al., “A study to assess the awareness of adults about precancerous and cancerous lesions and the associated risk factors,” J. Pharm. Bioall. Sci., vol. 15, pp. S977–S980, 2023.

M. Ranjan, A. Vashisht, J. K. Savita, S. Duseja, A. Sethi, R. Mohanty, N. H. Parekh, and M. Mehta, “Evaluating the tightness of proximal contact between natural tooth and adjacent implant-supported prosthesis,” Bioinformation, vol. 20, no. 6, pp. 644–648, Jun. 2024.

S. A. Milu, S. Akter, A. Fathima, T. Talukder, I. Islam, and M. I. S. Emon, "Design and Implementation of hand gesture detection system using HM model for sign language recognition development," J. Data Anal. Inf. Process., vol. 12, no. 2, pp. 139–150, 2024.

S. S. Mahtab, R. A. Anonto, T. Talukder, A. Raihan, and I. Islam, "Etching Technologies in Semiconductor Manufacturing: A Short Review," in Proc. Int. Conf. Emerg. Appl. Mater. Sci. Technol., Cham: Springer Nature Switzerland, 2024, pp. 319–324.

T. Talukder, "Scanning Magnetometry With a Low Cost NV Diamond Quantum Sensor Probe," M.S. thesis, Morgan State Univ., 2024.

A. Srivastava, “Securing PHI Data in Healthcare,” Sci. Data Learn. Mach. Intell. Artif. J., vol. 2, no. 4, pp. 1678–1679, Oct. 2024.

A. Srivastava, “Use of AI/ML in Data Security,” J. Artif. Intell. Mach. Learn. Data Sci., vol. 2, no. 2, pp. 1–3, 2024.

A. Srivastava, “WFH Impact on Work Culture and Future of Work Place,” Int. J. Innov. Res. Creat. Technol., vol. 8, no. 6, pp. 1–8, Nov. 2020.

A. Srivastava, “Impact of AI on Social Media and its Implication Mental Health,” Int. J. Sci. Res. Eng. Manag., vol. 7, no. 7, 2023.

A. Srivastava, “WFH Impact on Work Culture and Future of Work Place,” Int. J. Innov. Res. Creat. Technol., vol. 8, no. 6, pp. 1–8, 2022.

Published
2025-10-09
How to Cite
Velavan, P., Hakkim, I. S., Prasanth, A., Kumar, A. R., & Thariq, M. M. (2025). Integration of Health and Position Tracking System for Extreme Environments in Mining and Mountain Climbing. CENTRAL ASIAN JOURNAL OF MATHEMATICAL THEORY AND COMPUTER SCIENCES, 6(4), 1007-1022. Retrieved from https://cajmtcs.casjournal.org/index.php/CAJMTCS/article/view/831
Section
Articles